Adress:Weihai Road, Jing'an District, Shanghai

en10088 2 1 4301 specification

Contact us

X5CrNi18-10 / 1.4301 - SteelNumber - Chemical composition

Chemical composition % of steel X5CrNi18-10 (1.4301)EN 10088-2-2005. Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and

Reply

DIN EN 1.4301 Stainless Steel X5CrNi18-10 Material

EN 1.4301 Stainless Steel (X5CrNi18-10) DIN EN 1.4301 stainless steel (X5CrNi18-10) is a conventional austenitic stainless steel with good resistance to atmospheric, organic and inorganic chemicals. This material is widely used due to its excellent intergranular corrosion resistance, good cold deformability, good deep drawability and weldability.

Reply

Germany DIN 1.4401, DIN EN 10088-1, DIN EN 10088-2, DIN

This page cover the Mechanical Properties, Chemical Element, Cross Reference of Germany DIN 1.4401 steel grade, Application DIN 1654-5 (1989) Cold heading and cold extruding steels; technical delivery conditions for stainless steels; Replaced by DIN EN 10263-5:2002, Related specifications DIN EN 10088-1, Related specifications DIN EN 10088-2, Related specifications DIN EN 10088-3, Related

Reply

ArticleChemical composition of stainless steel flat

Nov 13, 2014 · Chemical composition of stainless steel flat products for general purposes to BS EN 10088-2 Introduction. for a cast of 1.4301 grade, with a specified chromium range of 17.5 to 19.5, the tolerance on a product check sample is still + or - 0.20, not + or - 0.2 as might be expected.

Reply

Forta 304/4301 EN 1.4301, ASTM TYPE 304 / UNS S30400

General characteristics. Forta 304/4301 is a classic 18% chromium, 8% nickel austenitic stainless steel. Forta 304/4301 is an all-purpose product with good resistance to atmospheric corrosion and to many organic and inorganic chemicals.

Reply

1.4301 Austenite Stainless Steel - materialgrades

Oct 24, 2018 · 1.4301 is also identified in the standard EN 10088. The scope of the standard covers specifications for bars, rods, wire, sections, semi-finished products and bright products of

Reply

EN 1.4301 / AISI 304 - Acerinox

Acerinox obtains profits totalling 33 million euros in the first quarter of 2019

Reply

Stainless SteelTables of Technical Properties

e with EN 10088-2:2005, except for he at resisting grad es (EN 100 95:1999) • Some “ASTM only” grades, which do not have European equivalents, are listed with their corresponding properties 1 1 1, 0 1,00 X5CrNi18-10 1.4301 304

Reply

AISI 316, AISI 316L, 1.4404, 1.4401 - stainless steel

1.4404, 1.4401, AISI 316/L - application and specification. Austenitic stainless steel is resistant to intergranular corrosion, used mainly in environments containing harmful chlorides, acids and urea. 316/316L is the basic grade from the CrNiMo group with Molybdenum, the addition of which significantly increases the resistance to pitting and crevice corrosion of steel by 2-3 times.

Reply

Steelinox Stainless steel 1.4301 / AISI 304 Steelinox

C max. 0,07 Cr 17,00 - 20,00 Ni 8,50 - 10,00 Mn 2,00 Si max. 1,00 . 1.4301 - AISI 304 is the standard for the austenitic grades of stainless steel due to its good corrosion resistance, ease of formability and fabrication coupeld with its aesthetic appearance in the polished, ground and brushed conditions.

Reply

EN 10088-2 Ambient Temperature Mechanical Properties of

EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes. This article gives the 0.2% and 1.0% proof strength, tensile strength and elongation of the 40 austenitic grades specified. The standard also specifies includes impact properties and resistance to intergranular corrosion acceptance criteria.

Reply

ALLOY 1.4301 / 304, 1.4307 / 304L - Sverdrup Steel -

1.4301 / 304, 1.4307 UNS S30400 AISI 304 Stainless steel stock plate coil AISI 304/ 304L has good resistance to atmospheric corrosion. EN 10088-2, EN 10088-3, EN 10088-5, EN 10272, EN 10222-5, AD-2000 W2, ASTM A479, ASTM A276, ASTM A240 ApprovalsPressure Equipment Directive (97/23/EC) Mechanical Properties.

Reply

Stainless steel flat products for building – the grades in

2 STAINLESS STEEL FLAT PRODUCTS FOR BUILDING – THE GRADES IN EN 1 0 0 8 8 - 4 EXPLAINED Table of contents of EN 10088-4 NoteIn this publication, the paragraphs marked in dark blueare specifically expanded on.

Reply

Steelinox Stainless steel 1.4301 / AISI 304 Steelinox

C max. 0,07 Cr 17,00 - 20,00 Ni 8,50 - 10,00 Mn 2,00 Si max. 1,00 . 1.4301 - AISI 304 is the standard for the austenitic grades of stainless steel due to its good corrosion resistance, ease of formability and fabrication coupeld with its aesthetic appearance in the polished, ground and brushed conditions.

Reply

1.4301 (AISI 304), S30400 Datasheet METALCOR

1.4301 / AISI 304 is the standard austenitic chromium-nickel stainless steel. High corrosion resistance. Easy formability. Not resistant to intergranular corrosion

Reply

ArticleChemical composition of stainless steel long

Chemical composition of stainless steel long products for general purposes to BS EN 10088-3 Introduction. BS EN 10088-3 is the material standard for stainless steel semi-finished products, bars, rods and sections for general purposes. Ferritic, martensitic, precipitation hardening, austenitic and austenitic-ferritic (duplex) grades are included.

Reply

1.4301 Chromium-nickel austenitic stainless steel

1.4301 is the standard for the austenitic grades of stainless steel due to its good corrosion resistance, ease of formability and fabrication coupled with its aesthetic appearance in the polished, ground and brushed conditions. Since 1.4301 is not resistant to intergranular corrosion in the welded condition, 1

Reply

Contact us