Adress:Weihai Road, Jing'an District, Shanghai

specifications sleeve steel pipe

Contact us

Find out Steel Pipe Dimensions & Sizes (Schedule 40, 80

Both ASME B36.10 and B36.19 are the standard specification for the dimensions of the steel pipe and accessories. ASME B36.10M The standard covers the standardization of steel pipe dimensions and sizes. These pipes includes seamless or welded types,

Reply

Corrugated Steel Pipe

1. Galvanized corrugated steel pipe M-36 A760M 2. Polymeric pre-coated sewer and drainage pipe M-245 A762M 3. Aluminized Type 2 corrugated steel pipe M-274 A760M 4. Structural plate pipe M-167 A761M Cold Applied Mastic or coal tar base coatings of various viscosities for field M-243 A849 Bituminous or shop coating of corrugated pipe or structural plate.

Reply

LOCAL LINK-SEAL® MODULAR SEAL GPT Link-Seal

WSG Steel Sleeve sizes though 10” shall be Schedule 40 Steel Pipe or standard wall thickness. WSG Steel Sleeve sizes 12” and larger shall have a .375” or standard wall thickness. WSG Sleeves through wall shall be cast in place and the pipe shall be installed centered in sleeve. The 2” collar, (water-stop) shall be the same type of steel as the WSG sleeve.

Reply

Standard Specification for Wrought Carbon Steel Sleeve

This specification covers wrought carbon steel sleeve type pipe couplings suitable for joining carbon steel pipes. Couplings are furnished in two types as followsType I couplings are intended for use on all schedules of pipe in which the pipe wall thickness does not

Reply

20 20 13 - Pipe Sleeves, Supports, and Anchors for

2.01 PIPE SLEEVES A. Sleeves Through Interior Walls, Floors, and Ceilings1. SleevesPipe shall be standard weight conforming with ASTM A53 or ASME B36.10. Steel plate anchor conforming with ASTM A36/A36M shall be welded to pipe. The assembly shall be hot-dip galvanized after fabrication. 2.

Reply

Schedule 40 Steel Pipe Sizes & Dimensions ANSI -

Chart gives dimensional - size data for American National Standard Schedule 40 Welded and Seamless Steel Pipe. Schedule 40 Steel Pipe Sizes & Dimensions ANSI - Engineers Edge Schedule 40 Steel Pipe Sizes & Dimensions ASME/ANSI B36.10/19

Reply

STANDARD SPECIFICATIONS FOR ROADS AND

2 Use steel pipe meeting an ASTM specification with the minimum yield strength of 3 35,000 psi. Use pipe that is circular in shape and straight in length. 4 1036-5 DUCTILE IRON PIPE AND FITTINGS 5 Use ductile iron pipe that conforms to ANSI/AWWA C151/A21.51. 6 Use ductile iron pipe fittings and specials conforming to ANSI/AWWA C110/A21.10 for

Reply

Steel Standards - ASTM International

Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe A930 - 09(2014) Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

Reply

DRESSER “TYPE” PIPE COUPLINGS

Style 411 Steel Couplings Material Specifications Style 411 Couplings are available in sizes from 1/2" to 48" Rated 150 PSI Working Pressure. Manufactured with Fusion Bonded Flexi-Coat® Epoxy Powder Coating. 2" - 12" (50mm-300mm) Standard weight design with cast follower, steel sleeve and low-alloy bolts and nuts. Material Specifications SleeveASTM A53, ASTM A513 or carbon steel having

Reply

STANDARD WATER MAIN SPECIFICATIONS

2.08 Standard Specifications For Dry-Barrel Fire Hydrants And Extension Kits II-3 2.09 Standard Specifications For Stainless Steel Tapping Sleeves With Branch II-3 Connections For Flanged Tapping Valve Or Mechanical Joint Tapping Valve 2.10 Specifications For Corporation Stops And Quarter Bends II-3 2.11 Definitions II-4

Reply

Suggested SpecificationsSteel Pipe for Water

Suggested Specifications - Steel Pipe for Water Transmisssion Cement-mortar Lined and Tape Coated PART 1 - GENERAL 1.01 Description Scope of WorkProvide and install steel pipe of the sizes and in the locations shown on the Plans and as specified herein. 1.02 Quality Assurance Commercial StandardsUnless otherwise stated, the latest

Reply

Branching Fittings, Service Saddles & Tapping Sleeves

JCM Tapping Sleeves place design emphasis on eliminating problems inherent with older pipe and field installations. These fabricated tapping sleeves have taken the complexity out of tapping larger pipe and provide more flexibility and strength than cast sleeves.

Reply

STANDARD WATER MAIN SPECIFICATIONS

2.08 Standard Specifications For Dry-Barrel Fire Hydrants And Extension Kits II-3 2.09 Standard Specifications For Stainless Steel Tapping Sleeves With Branch II-3 Connections For Flanged Tapping Valve Or Mechanical Joint Tapping Valve 2.10 Specifications For Corporation Stops And Quarter Bends II-3 2.11 Definitions II-4

Reply

Guidelines for the Design of Buried Steel Pipe July 2001

Guidelines for the Design of Buried Steel Pipe July 2001 Page 1. 1.0 Introduction. The American Lifelines Alliance (ALA) was formed in 1998 under a cooperative agreement between the American Society of Civil Engineers (ASCE) and the Federal Emergency Management Agency (FEMA).

Reply

pipe catalogue for pdf - bhushanpowersteel

pipe is washed in running water. After washing the pipe is dipped in the solution of Zinc Chloride and ammonia Chloride to give a Base metal for Better pickup of Zinc on steel surface. The pipes are dipped in a molten zinc Bath at a temperature of 450o C to get the proper adherent Coating. After Galvanizing the pipes are sent for threading

Reply

Pipeline Repair Fittings & Couplings Manufacturer JCM

Emergency service is our profession – JCM welcomes all opportunities to provide the solution to the problem – low pressure, high pressure, large diameter and exotic pipe contours. The JCM Sales Team is technically trained to consult with the project manager to provide the

Reply

411 Steel Couplings Material Specifications

Standard weight design with steel followers, steel sleeve, and high-strength low-alloy bolts and nuts. 14” - 60” (355mm - 1500mm)..00 Standard and heavy weight design with heavy rolled steel follower, steel sleeve and high strength low-alloy bolts and nuts. 411 Steel Couplings Material Specifications.

Reply

Contact us